Témata
Source: Toshulin

Where software brings giants to life

25. 06. 2025

As soon as you walk through the main gate of the Toshulin company premises in the charming Moravian town of Hulín, it becomes clear that this is no ordinary factory. The building itself, which houses the company‘s headquarters and production facilities, is a gem of industrial architecture from the late 1940s. However, what is particularly interesting are the locally produced machines and the software solutions, mainly from Siemens, that enable the machines to operate.

Hana Janisova

Graduated from the Theatre Faculty of AMU (Academy of Performing Arts in Prague). For most of her professional life, she worked as an editor for various periodicals or in PR positions for companies with diverse focuses, most recently in the information technology sector.
Personally, she is passionate about topics not only related to engineering and technology but also, for example, in the fields of social affairs and education, among others.
She has been working for MM Průmyslové spektrum since 2017. Her main extracurricular activity is animal protection.

Reklama

English version: Roman Dvořák

Original Czech version of the article:

Tam, kde software oživuje obry

Už v okamžiku, kdy vcházíte hlavní bránou do areálu společnosti Toshulin v půvabném moravském městečku Hulín, vám musí být jasné, že nevstupujete do „jen tak nějaké fabriky“. Sama budova, v níž firma sídlí a kde též probíhá výroba, je skvost industriální architektury z konce 40. let minulého století. Zajímavé jsou však především stroje místní produkce a též softwarová řešení, převážně z produkce společnosti Siemens, díky nimž stroje mohou pracovat.

We are guided through the large, bright, and spacious production hall by Vojtěch Frkal, R&D Director at Toshulin, and Vít Hadáček, Sales and Technical Advisor for Sinumerik at Siemens. They have planned our tour so that we can see all of the giants here in logical order.

The building where the company is based and where production takes place is a gem of industrial architecture from the late 1940s. (Source: Toshulin)

The first ones we stopped at were two vertical turning centers, SKIQ 16 and Basicturn 2000.

„Today, the trend is to produce multifunctional machines,” explains Vojtěch Frkal. „That is why these machines are not just vertical lathes like their predecessors, but machining centers based on a vertical lathe. In addition to turning, they can mill, drill, thread, bore, and grind. The Basicturn 2000 machine can machine workpieces with a diameter of up to 2 300 mm.”

Our hosts planned our tour of the large, bright, and spacious production hall so that we could see all the giants here in logical order. (Photo: H. Janišová)

„And it is Sinumerik that enables the combination of multiple technologies in one machine, so-called multitasking,” adds Vít Hadáček. „This machine on the right, the SKIQ 16, was manufactured back in 1986. Today, it has been upgraded as part of a research project in the Horizon 2020 programme. It is one of the first machine tools in the Czech Republic to be equipped with the Sinumerik One control system.”

The first machines we stopped at were two vertical turning centers, the Basicturn 2000 C2 and SKIQ 16. (Photo: H. Janišová)

Before the machine goes out into the world

We then come to another multifunctional center called Experturn 3000. However, it differs from the previous one in size, as it is even larger than the one we saw a moment ago. It can machine workpieces with a diameter of up to 3 200 mm.

But that’s not all in terms of size. A few meters away, we can see a real giant – the Forceturn 4000. The diameter of the table, which determines how large a workpiece can be produced here, is (as the name of the machine suggests) 4 000 mm. This means that workpieces up to 5 000 mm in diameter and weighing up to 40 tons can be produced here.

The Forceturn 4000 machine has a table with a diameter of 4 000 mm. This means that workpieces up to 5 000 mm in diameter and weighing up to 40 tons can be produced here. (Photo: H. Janišová)

„It is the largest machine we can produce here in Hulín,” says Vojtěch Frkal, adding: „We produce 20 – 25 machines a year. We work with a project system, which means that each machine is a separate, fully customized project. We design the machine here from start to finish, manufacture the parts, assemble, adjust, and test it... Then we need confirmation from the customer that it fully meets their requirements, after which it is disassembled and packed for transport. Here we are packing a machine for a customer in the US,” says Vojtěch Frkal, pointing to boxes of impressive dimensions.

Flexibility plays the leading role

The fact that local machines and the Sinumerik system truly form a single organism is perfectly illustrated by the automated production cell with solution for automated workpiece manipulation., The production cell is based on a combination of two vertical lathes that share a common automatic pallet exchange system. This is a complex production facility that takes advantage of the wide range of options offered by the Sinumerik CNC control system.

Reklama
Reklama
Reklama

„This is a semi-autonomous production cell with two Powerturn 1250 vertical lathes,” explains Vít Hadáček. „The target group for its use is the aerospace industry. The lathes are used to machine parts made of special alloys. Some operations are performed on one machine, while others are performed on the second machine. The workplace is equipped with a shared system for handling workpieces based on automatic handling of technology pallets. This system not only allows for the handling of parts, but also includes storage positions for autonomous work, which is used during the night shift. The cell therefore allows for unattended operation.”

This Flexible Manufacturing System (FMS) also allows the production cell to operate autonomously according to specific orders. Only one worker is needed to operate two machines and pallet manipulation. The workplace also includes automated tool management.

The automated production cell with solution for automated workpiece handling is based on a combination of two vertical lathes that share a common automatic pallet exchange system. This complex production facility takes advantage of the wide range of options offered by the Sinumerik CNC control system. (Source: Toshulin)

„This production cell is characterized by a high level of automation. It is controlled by the Sinumerik 840D sl system. In the future, we plan to implement the Sinumerik ONE system,” says Vít Hadáček. „As part of the chosen solution, the control systems of the machine tools and the control system of the pallet handling system communicate with each other. The task of the handling control system is also to exchange data with higher-level IT systems – ERP and MES.”

(Unfortunately, during our visit, we only saw this solution in photos and videos here link or QR code to video, because at that time the cell was already in operation at the production facility of Toshulin’s customer, editor’s note).

At this point, we are joined by Pavel Sedlák, application engineer at Toshulin, who describes what communication with external IT systems entails.

According to him, there is data for each specific workpiece that is transferred to the control system of the handling system after the workpiece identification code is scanned. As soon as the machine tool is available, the workpiece is automatically transferred to it, along with the workpiece data to the machine control system. At the end of machining, the part is measured using a touch probe. The measurement results are added to the workpiece data. When the workpiece leaves the production cell, all data on the machining process and results are sent to the customer’s higher-level information system database. This ensures the traceability of the production history of each part. In addition to workpiece data, the higher-level IT system also consumes information about machine operation. The customer has an overview of the current status of the production cell at all times. The data is also used for operational efficiency analyses.

Multiple channels or multiple Sinumerik control systems

„The automatic pallet exchange system is actually a separate device that can be optionally combined with Toshulin machines,” explains Vít Hadáček. „If there were only one control system, the entire solution would have to be linked to it. However, since the production cell solution has three main components, each of which can be used independently, three Sinumerik control systems are installed here. Another option in similar cases is one Sinumerik with multiple channels.“

On the vertical lathes integrated into the production cell, a tool magazine with an automatic tool loading manipulator also works “under the control of Sinumerik.”

Together, we move on to another machine in the Toshulin assembly area. It is an Experturn 1250 S P4 vertical lathe. This is a stand-alone machine, again equipped with a system for automatic handling of workpieces on technological pallets.

Experturn 1250 S P4 vertical lathe – a stand-alone machine again equipped with a system for automatic handling of workpieces on technological pallets. Local technicians, together with specialists from Siemens, are currently creating a so-called digital twin for it. (Photo: H. Janišová)

„For this machine, a solution was chosen where pallet handling is controlled by another channel of the control system, so there is only one Sinumerik here,” says Pavel Sedlák, adding: „We developed our own user interface for operating the tool magazine on this machine.”

„Sinumerik can work through multiple channels, so there are multiple solutions available here as well, just as in the case of installing multiple Sinumerik control systems,“ adds Vít Hadáček.

Reklama

Both of the aforementioned devices are equipped with an automatic system for exchanging technological pallets, which allows for the automation of workpiece handling.

„Production automation is a hot trend today, which is why the share of machines with optional equipment of this type is constantly increasing,” says Vojtěch Frkal, adding: „Customers are struggling with a shortage of skilled workers, which is creating demand for automation...”

Another monumental machine is the Expertum 2000, controlled by the Sinumerik One system with an NCU 1750 processor unit. (Photo: H. Janišová)

Another monumental machine we had the opportunity to see was the Expertum 2000, controlled by the Sinumerik One system with an NCU 1750 processor unit.

„This machine is also very interesting because it will soon be part of a flexible manufacturing system consisting of a total of three machines. In addition to the vertical lathe from Hulín, there will be two horizontal milling machines from a renowned Italian manufacturer,” says Vojtěch Frkal. „This is a challenge for us, as it was necessary to develop a common interface for clamping pallets for machines of different technologies and from different manufacturers,” he adds.

Digital twin for increased efficiency

„Every machine we manufacture here also has an automatic tool change system,” explains Vojtěch Frkal. „We can offer a wide range of variants for the tool exchange system, depending on the number of tools the machine has.”

„Sinumerik has many useful functions for tool management, such as optimizing magazine occupancy or the changeover process. The aim is, for example, to reduce the time required for tool exchange to a minimum,” explains Vít Hadáček.

Sinumerik also allows you to monitor energy consumption and control savings.

One of the machines produced here is currently being packed for a customer in the US. (Photo: H. Janišová)

„Today, we equip machines with an energy-saving function in various modes, depending on how long the machine will be out of use. The operator can put the machine into energy-saving mode manually, or the machine can be automatically set to ‘sleep’ mode after a set period of inactivity. The idea is to minimize the operator’s responsibility, thereby eliminating the infamous human factor...” says Vít Hadáček.

Another interesting fact we learned during our visit to Toshulin is that local technicians, together with specialists from Siemens, are currently creating a so-called digital twin for the Experturn 1250 machine.

As soon as you enter the main gate of the Toshulin company premises in the charming Moravian town of Hulín, it becomes clear that you are not entering “just any factory.” (Source: Toshulin)

„It was ordered by a customer who is fully aware that the digitization and virtualization of certain activities can significantly help them increase efficiency, as expensive production equipment will not be unnecessarily blocked by activities other than production. The digital twin will allow them to simulate and fine-tune planned production in advance, before it actually takes place,” concludes Vojtěch Frkal.

Související články
Tam, kde software oživuje obry

Už v okamžiku, kdy vcházíte hlavní bránou do areálu společnosti Toshulin v půvabném moravském městečku Hulín, vám musí být jasné, že nevstupujete do „jen tak nějaké fabriky“. Sama budova, v níž firma sídlí a kde též probíhá výroba, je skvost industriální architektury z konce 40. let minulého století. Zajímavé jsou však především stroje místní produkce a též softwarová řešení, převážně z produkce společnosti Siemens, díky nimž stroje mohou pracovat.

Systémy produktivního obrábění

Zákaznických dnů Tajmac-ZPS se tradičně účastní i společnost Siemens. Ta letos představila ve dvou expozicích více než tisícovce návštěvníků novinky, které pomohou zvýšit produktivitu obráběcích strojů. Díky vysoce výkonnému řídicímu systému Sinumerik One.

Digitální výroba pro produktovou diverzitu

V německém dolnofranském lázeňském městě Bad Neustadt, nacházejícím se na severozápadním okraji Bavorska, se elektromotory pro průmyslové využití vyrábějí již přes 80 let. Zásluhou vlastního vývoje a mnohaletých zkušeností s rozvojem výroby je tento závod společnosti Siemens zároveň i důkazem toho, jak zásadně je digitalizace nápomocna v oblasti efektivity a produktivity v tzv. diskrétní výrobě.

Související články
Welcome to Digital Arena: Průmysl 4.0 v praxi

Aspekt globalizace, implementace technologických inovací a rostoucí konkurence vyvíjí na firmy stále větší tlak v oblasti efektivity veškerých jejich činností. Klíčovou cestou k jejímu dosažení je digitální transformace.
Často jsou v této otázce vítězi menší firmy, neboť velké společnosti kvůli nepružnosti provozního modelu a zastaralých IT systémů často nedokážou změny implementovat dostatečně rychle.

Reklama
Reklama
Reklama
Reklama
Související články
Na cestě k digitalizované výrobě

Siemens na letošním hannoverském veletrhu, který se koná od 1. do 5. dubna, představí chytrá řešení pro aplikaci Průmyslu 4.0 v různých odvětvích průmyslové sféry. Jak naznačuje letošní veletržní slogan "Digital Enterprise - Thinking industry further!", hlavní pozornost bude věnována digitalizaci.

Softstartéry elektromotorů v Trutnově

Výrobní závod Siemens Nízkonapěťová spínací technika k příležitosti dvacátého pátého výročí spustil novou linku na výrobu softstartérů elektromotorů řady 3RW5, které se uplatňují v průmyslových aplikacích. Nová výroba využívá prvky digitalizace vycházející z konceptu Průmysl 4.0.

Digitální transformace právě teď

V posledním dubnovém týdnu se v německém Hannoveru uskutečnil další ročník světově významného průmyslového veletrhu Hannover Messe 2018. Motto letošního ročníku „Integrated Industry – Connect & Collaborate“ skrývá témata jako strojové učení, umělá inteligence, průmyslové IT platformy nebo např. používání robotů a autonomních systémů ve výrobě. Také společnost Siemens na svém stánku představovala řešení pro výše popsaná témata pod sloganem „Digital Enterprise – Implement now!“.

Mladí hrdinové: Tvořit skutečně využívaná funkční řešení

Mladých lidí, kteří se rozhodnou zasvětit svůj profesní život některému z technických oborů, je čím dál méně. To je, a zejména může být, pro naši zemi opravdový problém. Tím více si musíme vážit těch, kdo se na techniku dali, a hlavně těch, kdo v oboru zůstali. V seriálu Mladí hrdinové sledujeme nejen tyto techniky, kteří mají před sebou slibnou kariéru, ale též jejich šéfy – manažery ve strojírenských nebo technologických firmách. Vždyť právě oni mohou své mladé kolegy motivovat (nebo také demotivovat)...
V tomto díle našeho seriálu jsme si povídali s lidmi ze závodu Siemens Trutnov.

Příklady táhnou: Jasné rozhodnutí - technika

Že prý FEL není pro holky, že je to těžká škola a podobně… Přesně tyto názory si Elvíra Zajícová od mnohých vyslechla v době, kdy končila studium na čtyřletém gymnáziu a vybírala si, kam půjde na vysokou školu. A právě tato nesmyslná skepse okolí ji naopak přesvědčila, že by to měla jít zkusit. Vystudovala ČVUT v Praze, fakultu elektrotechniky, katedru řídicí techniky. Své volby nikdy nelitovala a dnes je, i díky kvalitnímu technickému vzdělání, ředitelkou oddělení Motion Control ve společnosti Siemens ČR.

Partner i pro dobu, kdy vane protivítr

Digitalizace. To je dnes jedno z nejčastěji skloňovaných slov, jestliže hovoříme na téma průmysl, výroba, ale například i veřejná správa a mnohé další oblasti. A pokud toto slovo slyší někdo, kdo byť jen zhruba ví, o co jde, vybaví se mu vzápětí další slovo – Siemens. Ačkoli tato společnost zasahuje svými produkty a službami do mnoha oblastí, právě digitalizace výroby je jednou z jejích vlajkových lodí. Vypravili jsme se proto za paní Elvírou Zajícovou, která ve společnosti Siemens zastává pozici vedoucí oddělení Motion Control.

Sinumerik Cup: Nad rámec předepsaného

Letos proběhl již 10. ročník soutěže Sinumerik Cup, kterou tradičně pořádá společnost Siemens. Na podrobnosti této soutěže pro technicky nadané mladé lidi jsme se zeptali Aleše Polzera z Ústavu výrobních strojů, systémů a robotiky, FSI VUT v Brně, a Víta Hadáčka ze společnosti Siemens, kteří jsou hlavními organizátory soutěže.

Není na co čekat

Každým dnem jsme blíže okamžiku, kdy se z oblíbeného řídicího systému Sinumerik 840D sl stane výběhový produkt. Bodem zlomu bude první říjen letošního roku. A o rok později již bude možné tento systém koupit již jen jako náhradní díl! Nastal proto čas migrovat na novou generaci řídicího systému - Sinumerik One. Redakce MM Průmyslového spektra oslovila pana Jaroslava Pracanta, vedoucího výroby ve firmě První česká obráběcí (Pozn. red.: Jde o fiktivní osobu a fiktivní firmu), aby si na toto téma pohovořil s odborníkem na slovo vzatým, Adamem Koncerem, vedoucím oddělení řídicích systémů pro obráběcí stroje ze společnosti Siemens.

Život v korporátu: Ptej se, co můžeš nabídnout

Pokud bychom chtěli komplexně popsat profesní působení Ing. Pavla Kafky, měli bychom v našem časopise – jakkoli je obsáhlý – problém s místem. Avšak vzhledem k tomu, že se tomuto významnému manažerovi a diplomatovi poměrně obšírně věnuje (nejen) Wikipedie, stačí zde zmínit, že Pavel Kafka byl mimo jiné v letech 1994–2009 úspěšným generálním ředitelem českého zastoupení společnosti Siemens. A právě to je důvodem, proč jej MM Průmyslové spektrum požádalo o rozhovor, který bude pilotním dílem našeho nového seriálu Život v korporátu.

Řídicí systém nejen pro budoucnost

Podpora komplexní digitalizace. Tak by se dala stručně charakterizovat základní vlastnost řídicího systému Sinumerik One z produkce společnosti Siemens. Mezi typické zástupce firem, které jej úspěšně využívají, patří i výrobce obráběcích strojů Soraluce a jejich uživatel Abus Kransysteme. Tyto dvě společnosti jsou důkazem, že digitalizaci lze zavádět postupně a vlastním tempem, které zohledňuje všechny specifické potřeby podniku.

Reklama
Předplatné MM

Dostáváte vydání MM Průmyslového spektra občasně zdarma na základě vaší registrace? Nejste ještě členem naší velké strojařské rodiny? Změňte to a staňte se naším stálým čtenářem. 

Proč jsme nejlepší?

  • Autoři článků jsou špičkoví praktici a akademici 
  • Vysoký podíl redakčního obsahu
  • Úzká provázanost printového a on-line obsahu ve špičkové platformě a mnoho dalších benefitů....  již 30 let zkušeností s odbornou novinařinou
Předplatit